Illuminating Christmas

Happy holidays everyone! The two younger boys and I have been having fun playing in the white stuff. 

Despite what the seasonal calendar says, winter arrived a little over 2 weeks ago with a snow storm that hit its peak right at the 5 pm rush hour. We live in a deep river valley with a rollercoaster-ride-of-a-hill on one side and a steep slope that would be perfect for sledding on the other. Cars don't fair well on either of the two hills when there is a storm. Our street was a parking lot for hours. No one could get out of the valley.

Other than shovelling, my spare time in the weeks leading up to Christmas was filled with wrapping gifts, baking and decorating for the holidays.  I thought I would share a couple of the wreaths I made this year. Both make use of strings of little fairy (LED) lights. 

The start of the first decorating project was a plain evergreen wreath from the grocery store. 

To illuminate it, I used two strings of lights from the dollar store. Here's how I put it together:  

Step 1: I turned the wreath over to the wire frame at the back. Then I passed the first string of lights through an opening in the greenery to the front of the wreath. I left the string of lights hang loosely at the front of the wreath for now. Then I turned the wreath back over and attached the first battery pack to the wire frame with some green florist's wire. 

Step 2: Now we are going to attach the second string of lights in the same manner. It is critical to balance out the back of any wreath so it will sit flat to your door.  With a fresh piece of wire,  I attached the second battery pack on the opposite side of the wreath. 

Step 3: I turned the wreath over to the front and roughly placed my strings of lights in amongst the foliage. I ran the first string of lights clockwise around the wreath and the second string of lights counter-clockwise. 

Once I was happy with the placement of my lights, I used some florists wire to hold them in place. To do this, I used loops of wire that I twisted closed on the back of the wreath.

Step 4: If your wreath was as basic as mine, you may want to augment it with more greenery, berries, pinecones and a bow. That's just what I did next.

Here's the first finished wreath. You can't see the glow of the lights really well in the daytime, but at night the they shine nicely.

One important thing to note: These cheap LED light strings are for indoor use only. I have a covered porch and a screen door with a glass front, so I was able to get away with using indoor lights. If your door is exposed, this type of light string may or may not short out in wet weather.

For the wreath I made for the back door, I used three strings of lights. There are two LED sets ($2.50 each from Walmart) and a string of larger stars ($5 from the Real Canadian Superstore).

This time the 3 battery packs were placed in thirds by dividing the wreath circumference into three equal parts. Again, it is critical to balance out the back of the wreath so it will sit flush to the door.

Step 1: The first step is to attach the two strings of mini-lights. (The third string of lights will go on later after the greenery is attached. If you try this, make sure you space the battery packs so you leave room for the third battery pack that you will add later).

To work my lights through the maze of grapevines, I used a pencil and poked it into the the vines to create a gap. Then I worked each of the lights up through those gaps. Once the pencil is removed, the gaps disappear.

Step 2: Next add your greenery to the front of the wreath, some berries and a bow. (Tuck the greenery right into the vines. Loops of florist's wire can then be added to hold it securely in place.)

Step 3: Turn your wreath over to the back and attach the third battery pack for the larger string of lights with two loops of wire. Flip the wreath back to the front and roughly place the lights using the greenery to conceal the wire for the lights. Using more loops of florist's wire secure this final string of lights to the wreath.

If you are having trouble disguising some of the wires, add a few more pieces of greener to conceal them.

I am especially happy with the way this one turned out. 

Again, these light strings are for indoor use only. The back door has screen door with a glass front, so I was able to get away with using indoor lights. If your door is exposed, these type of lights might short out in wet weather. 

Outdoor strings have larger, more weatherproof battery packs, but it's hard to work with the larger sized packs. As an experiment I made a wreath for the back gate using strings of indoor LED lights. It held up remarkably well and shone every evening through the holiday season.

Have fun decorating for the holidays!

5 Ways to Dress-up a Basic Evergreen Wreath

Basic evergreen holiday wreaths are available here at most grocery and big box stores.

One of the best thing about these store-bought wreaths is that all the hard work is done for you. 

They're also affordable- I picked this one up at Walmart for $12.98. 

But, they are a little ho-hum. 

So for fun, I gave myself a little assignment: 5 ways to dress up and personalize a basic, store-bought evergreen wreath.

The first thing I did was to give my wreath a bit of a haircut. As you can see, it was looking a bit like a shaggy dog! You could barely see through the centre.

The first design I came up with was themed on birds and the color blue.  

How-to in a nutshell: (For more detailed instructions and a materials list, click this link.) Insert some boxwood sprigs, dogwood branches and red berries into your store bought wreath and allow them to catch in the mix of evergreens. 

Take some white craft paint and dry-brush "snow" onto the pinecones and branches where snow would naturally collect. Once dry, use florist's wire to tie the pinecones into the wreath.

Remove the rope hanger from a little cardboard birdhouse ornament, poke a hole in the bottom and inserted a florist's pic. Add a dab of hot glue to secure the pic onto the birdhouse. 

Insert the birdhouse pic into the wreath and allow it to catch in the evergreens. Clip 3 bluejays and 3 little bluebirds onto the dogwood and berry branches (I found these at Michaels craft store).

Finally, attached a blue bow with some florist's wire. 

My next idea was to use a mix of fruit and berries to add a little pop of color to all that green.

How-to in a nutshell: (For a more detailed how-to and a material list, click this link.) Take some white craft paint to dry-brush "snow" onto the pinecones. Once dry, use florist's wire to tie them into the wreath.

Insert some boxwood sprigs to add a some leafy texture. 

Next, add in red and orange berry branches and allow them to catch in the mix of evergreens. 

Apply a dab of hot glue to the bottom of the yellow and red mini-apples (I found these at Michaels craft store). Insert a florist's pic into the hot glue and hold it for a minute or so until the glue sets. Insert the finished apple pics into the wreath. 

Attach a red bow with florist's wire. 

I think roses are a lovely holiday flower. This wreath combines white roses with red berries.

How to in a nutshell: (For a more detailed how-to and a materials list, click this link.) Take some white craft paint to dry-brush "snow" onto the pinecones. Once dry, use florist's wire to tie them into the wreath.

Insert some boxwood sprigs red berries into the store bought wreath and allowed them to catch in the mix of evergreens. 

I bought a stem of little white silk roses and a stem of white forsythia (I found these at Michaels craft store). I cut the large stem into a number of shorter branches and inserted these branches into my wreath. 

I did the same for a stem of pearl berries and glittery gold eucalyptus (also found these at Michaels craft store)- cutting one large stem into several smaller branches. 

I then added the smaller stems of pearl berries and glittery eucalyptus. 

Finally, I fastened a white bow with some florist's wire. 

My third wreath is inspired by the "Twelve Days of Christmas" song that has the refrain 

"and a partridge in a pear tree". 

Okay, this probably isn't a partridge, but it is close enough.

How to in a nutshell: (For a more detailed how-to and a materials list, click this link.) Take some white craft paint to dry-brush "snow" onto the pinecones. Once dry, use florist's wire to tie them into the wreath.

Insert some boxwood sprigs and red berries branches into your wreath and allow them to catch in the mix of evergreens. 

Apply a dab of hot glue to the bottom of the yellow mini-pears (I found these at Michaels craft store). Insert a florist's pic into the hot glue and hold it for a minute or so until the glue sets. 

Insert the finished pears pics into the wreath. 

Gather three feathers together in your fingers. Hold them at the top of a florist's pic and wrap the fine wire around and around to create a feather pic. Insert several feather pics around the circumference of the wreath. 

Clip on your partridge.

Attach a red bow with florist's wire. 

I thought that my final wreath should have a garden theme- this is a garden blog afterall- so I decided to do a red ladybug wreath with a pretty plaid bow.

How to in a nutshell: (For a more detailed how-to and a materials list, click this link.) Take some white craft paint to dry-brush "snow" onto the pinecones. Once dry, use florist's wire to tie them into the wreath.

Insert some boxwood sprigs and red berries branches into wreath and allow them to catch in the mix of evergreens. 

Take a single large stem of glittery eucalyptus (found at Michaels craft store) and cut it into a number of shorter branches. Insert the shorter eucalyptus branches into your wreath. 

Take a large branch with gold glitter (found in the floral department at my local grocery store) and cut it into a number of shorter pieces. Add them into the wreath allowing them to catch in the evergreens.

Take the red wooden ladybugs (found in the craft section of my local Dollar store) and apply a dab of hot glue onto the back. Place them on the gold branches and hold them in place for a few seconds until the hot glue has set. Note: If you can't find ladybugs, festively colored butterflies might be fun (look for butterflies at Michaels)

Attach a plaid bow and jingle bells to the wreath with some florist's wire. 

While I was working away making these holiday wreaths I came up with at least 

five more themes...ah well, maybe next year!

Have a wonderful weekend!